Whatsapp ID
Whatsapp ID: 18569983079
Wechat ID
WeChat ID: 18569983079

A 8 Ton Hydraulic Towing Winch Was Delivered To New Caledonia

Aicrane has delivered an 8 ton hydraulic towing winch to New Caledonia. This marine winch will be installed on a cargo ship. The customer’s old equipment needed to be replaced, and then he found Aicrane by browsing our website at Google. The following case details, pictures and videos will help you learn more about the machine.

45 ton hydraulic towing winch to New Caledonia
8 Ton Hydraulic Towing Winch

Hydraulic Towing Winch For Sale
Hydraulic Winch To New Caledonia

Hydraulic Towing Winch Detials
Pneumatic Control

Towing Winch For Sale
Test Of The Control System

FAQs For The 8 Ton Hydraulic Towing Winch

What Are The Parameters Of The Towing Winch?

Power Model Hydraulic
Working load 8T-10.8m/min (3rd layer), 4T-21.6m/min (3rd layer)
Drum capacity 40mm*400m (total 7 layers)
Holding load 90T (3rd layer, static)
Belt brake pneumatic + manual operated
Jaw clutch manual operated
Warping load 9.6T-5.8m/min, 4.8T-11.6m/min
The following video is about the 8 ton hydraulic towing winch test, and it works well before shipment.

What Winch Solutions Did Aicrane Provide For The Customer?

  • The customer sent an inquiry to Aicrane, and he expressed that he needed an 8 ton hydraulic towing winch for his cargo ship. During communication, we knew that he only wanted to get a winch without hydraulic pump station, and he also told us the parameters of his old towing winch and the model of his hydraulic pump station.
  • This 8 ton winch was a machine to replace the old equipment. Therefore, whether the winch base could match the original foundation should be considered. Aicrane engineers provided detailed drawings for the customer, and modified the base of our winch actively according to the customer’s requirements.
  • In addition, the anti-corrosion of this marine hydraulic winch was also a concern. It will usually be used on the sea. For solving this problem, the base of this winch was equipped with baseplate.
  • In the production process, the customer wanted to know the production progress, and we updated the production pictures for him weekly.

How Did The Customer Think Of Aicrane?

In this case, the customer’s main concerns were the confirmation of the technical solution, as well as the replacement of the old equipment foundation, etc. Aicrane engineers responded timely and professionally. Therefore, the customer said that Aicrane was with high-quality winches, good service attitude, and high matching degree of technical solutions.

If you have interest in the winch, please contact us.

Get In Touch
Our teams are on hand to provide you with the right lifting solutions.
1.What will the winch be used for: ?
2.Rated load(T) or pull force(KN): ?
3.Drum capacity(mm x m): ?
4.3 phase power supply(v/hz): ?
5.Working speed(m/min): ?
6.Project introduction: project working site, project budget, etc