Technical Parameters for Common Winch

Right here in Winch Factory, with our professional winch engineer’s expert teams’ reference and our clients’ requirements, we provide you the following information about winch specifications, just for your reference.

AQ-JD-11.4 Dispatch winch

                      manual boat lift winch for sale

Get a Free Quote

• Winch traction: 10KN
• Rope diameter: 12.5mm (4 points rope)
• Rope capacity: 400m
• Dimensions: 1120 * 766 * 727mm (L * W * H)

Note: the limited usage

Get a Free Quote

 1. It is recommended that the angle be less than 12 degrees

The maximum load angle should be 12 degrees, with 12.5mm (4 points rope). The transport length is 400m, and the required winch traction is 9.285KN, and wire rope safety factor is 8.626 which meets winch and wire rope selection requirements.

  2. It is recommended that the angle be less than 10

The maximum load angle should be less than 10 degrees, with 12.5mm (4 points rope).
Its transport length should be 400m, the required winch traction for the 9.6728KN, wire rope safety factor of 8.280.

AQ-JD-25KW Dispatch Winches

Get a Free Quote

• Wire Rope Static Tension (Traction): 16KN
• Wire Rope Diameter: 15.5mm (5 points rope) Capacity Cable Capacity: 400m Dimensions: L * W * H
•  Cable Capacity: 400m Dimensions: L * W * H
  = 1460 * 1212 * 1267mm Note: Use the limit
•  Recommended in the angle should be fewer than 7 degrees at the level of the use of roadway; in the case of dry pull.
• The maximum load of 11 tons, the maximum transport angle of 7 degrees, with 15.5mm (5 points rope)
• The transport length of 400m, the required winch traction force of 15.1KN, wire rope safety factor of 8.275
• The Meet winch and wire rope selection requirements.

D-40 (A) Dispatch winch

Get a Free Quote

• Traction: 25KN
• Wire rope diameter: 18.5mm (6 points rope) capacity of the amount of rope: 500m
• Dimensions: L * W * H = 1830 * 1794 * 1390mm Note: Use the limit

It is recommended to use in the horizontal roadway with angle should be less than 10 degrees. In the case of dry rolling, the maximum load is 12 tons, the maximum transport angle is 10 degrees, with 18.5mm (6 rope), the transport length is 500m, the required winch traction For the 23.52KN, wire rope safety factor of 7.65. Meet winch and wire rope selection requirements.

AQ-JD-55 Dispatch winch

Get a Free Quote

• Traction: 39.2KN
• Wire rope diameter: 21.5mm (7 points rope) capacity rope capacity: 760m
• Dimensions: L * W * H = 3150 * 2280 * 1635mm Note: Use the conditions of the limit

The total weight of the load in 8.5t; along the maximum transport slope of 21 degrees; wire rope with 21.5mm (7 points rope); traction length of 760m; winch required traction force of 37.17KN; wire rope safety factor of 6.604. Meet the selection requirements.

AQ-SDJ-14 Dispatch winch

Get a Free Quote

• Maximum traction: 140KN
• Wire rope diameter: 21.5mm (7 points rope) capacity of the amount of rope: 150m
• Dimensions: L * W * H = 2500 * 720 * 785mm Note: Use the conditions of the limit

The total weight of the load in 11t; along the maximum transport slope of 19 degrees; wire rope with 21.5mm (7 points rope); traction length of 150m; winch required traction force of 37.25KN; wire rope safety factor of 6.589. Meet the selection requirements.
The total weight of the load in 22t; along the maximum transport slope of 9 degrees; wire rope with 21.5mm (7 points rope); traction length of 150m; winch required traction force of 36.598KN; wire rope safety factor of 6.708. Meet the selection requirements.

SDJ-25 Dispatch winch

Get a Free Quote

• Maximum traction: 250KN wire rope diameter: 26mm (inch rope)
•  Rope Capacity: 200m
• Dimension: L * W * H = 3000 * 920 * 910mm

Note: Use the conditional limit
The total weight of the load in 14t; along the maximum transport slope of 21 degrees; wire rope with 26mm (inch rope); traction length of 200m; winch required traction 52.8350KN; wire rope safety factor of 6.8515. Meet the selection requirements.
The total weight of the load at 24t; along the maximum transport slope of 12 degrees; wire rope with 26mm (inch rope); traction length of 200m; winch required traction 52.8987KN; wire rope safety factor of 6.8432. Meet the selection requirements. Detailed parameters of the windlasses, welcome contact us.